Setting The Unit - Heatilator GCBC36LE Installation Instructions Manual

Figure 3 shows a typical framing of this appliance
using combustible materials. All required clearances
to combustibles must be adhered to.
Figure 3
Framing
Model 36" Series 42" Series
A 42
1. Positioning the firebox
This appliance may be placed on a smooth
combustible or noncombustible continuous, flat
surface. When the appliance is installed direct-
ly on carpeting, tile or other combustible material
other than wood flooring, the appliance shall be
installed on a metal or wood panel extending the
full width and depth of the appliance. Slide the
unit into position and level the appliance from
12-97
C. FRAMING
*** from base of appliance
1 1
/ " 48 / "
4 4
D. SETTING THE UNIT
WEAR GLOVES AND SAFETY GLASSES
FOR PROTECTION.
PROVIDE ADEQUATE CLEARANCES
AROUND THE AIR OPENINGS INTO THE
COMBUSTION CHAMBER AND ADEQUATE
ACCESSIBILITY CLEARANCES FOR SER-
VICING AND PROPER OPERATION.
side-to-side and front-to-back. Shim with noncom-
bustible material as necessary.
Secure the appliance by bending out the nailing
flanges on each side of the appliance and nail to
framing. The nailing flanges have been positioned
5/8" back from the front of the unit to allow the addi-
tion of drywall.
5i
CAUTION
CAUTION
28887A