Firebox Preparation - Heatilator GCBC36LE Installation Instructions Manual

1. Upper Panel Removal
Lift upward on the upper panel and pull out.
2. Attaching the Hood
Hood must be attached or a fire hazard may result.
The hood is to be located above the upper grille
panel. Locate the four screws just inside the upper
section of the fireplace. Loosen these screws, posi-
tion the hood and tighten the screws. See Figure 15.
Figure 15
Hood Placement
3. Glass and Screen Removal
See page 7 of the "Operating and Maintenance
Instructions."
12-97
H. FIREBOX PREPARATION

4. Firebox Preparation

Remove the straps from the screws on the hearth
pan. Remove the foam material. The log set should
look similar to that in Figure 16.
(Shown with optional refractory)
13i
Figure 16
Log Set for 36" CALIBER
28887A