Standing Pilot Operation; Electronic Ignition Operation; Start-Up Issues - Heatilator GCBC36LE Installation Instructions Manual

A. STANDING PILOT OPERATION
Heatilator recommends you leave the pilot on year
round.
If you decide to shut down the appliance for a long
period of time:
1. Turn all wall switches to OFF.
2. Turn pilot knob on valve to OFF.
3. Turn the gas line to CLOSED.
Lighting the Fireplace During Regular Use. Turn the
wall switch to ON.
Shutdown During Regular Use. Turn the wall switch
to OFF.
B. ELECTRONIC IGNITION OPERATION
To shut down the appliance for a long period of time:
1. Turn all wall switches to OFF.
2. Turn the gas line to CLOSED.
Lighting the Fireplace During Regular Use. Turn the
wall switch to ON.
Shutdown During Regular Use. Turn the wall switch
to OFF.

START-UP ISSUES

Issue
1. Condensation on glass
2. Blue flames
3. Odor from unit
4. Film on the glass
NEVER USE GASOLINE , GASOLINE-TYPE LANTERN FUEL, KEROSENE, CHARCOAL
LIGHTER FLUID OR SIMILAR LIQUIDS IN THIS APPLIANCE. KEEP ANY FLAMMABLE LIQUIDS
A SAFE DISTANCE FROM THE APPLIANCE.
12-97
D. START-UP ISSUES
Why....Possible Solutions
1. This is a result of gas combustion and temperature varia-
tions. As the unit warms, this condensation should disap-
pear.
2. This is a result of normal operation and the flames will
begin to yellow as the unit is allowed to burn.
3. When first operated, this unit may release an odor for the
first several hours. This is caused by the curing of the paint
and the burning off of any oils remaining from manufactur-
ing.
4. This is a normal result of the curing process of the paint
and logs. Glass should be cleaned within 4-6 hours of initial
burning to remove deposits left by oils from the manufactur-
ing process. A nonabrasive cleaner, such as
may be necessary.
WARNING
5
C. FUEL
Do not burn wood or other material in this appliance.
Natural or propane gas conversions necessary to meet
the application need to be made by a qualified technician
using Heatilator specified and approved parts.
In the event your appliance must be converted to use
propane, you must use a CKVP Conversion Kit. To con-
vert to use natural, you must use a CKVN Conversion Kit.
WARNING
DO NOT USE THIS APPLIANCE IF ANY PART
HAS BEEN UNDER WATER. IMMEDIATELY
CALL A QUALIFIED SERVICE TECHNICIAN TO
INSPECT THE APPLIANCE AND TO REPLACE
ANY PART OF THE CONTROL SYSTEM AND
ANY GAS CONTROL WHICH HAS BEEN
UNDER WATER.
®
Brasso
28887A