Correcting Distorted Sound; Switching The Sound Muting/Attenuation - Pioneer AVH-P5750DVD Operation Manual

Section
17 Initial Settings
4 Touch c or d to switch the subwoofer
output or non fading output.
Touch c to select subwoofer output and
SUB.W appears in the display. Touch d to se-
lect non fading output and FULL appears in
the display.
Notes
! Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to Using nonfading output on page 65)
or subwoofer output (refer to Using subwoofer
output on page 65) in the audio menu on.
! If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.

Correcting distorted sound

You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P7650/DEQ-P6600) is connected
to this unit, you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch D. ATT to switch the digital at-
tenuator setting.
Touching D. ATT switches the digital attenua-
tor settings in the following order:
HIGHLOW
86
En
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! The sound is turned off, MUTE is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed
and no audio adjustments, except volume
control, are possible.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Touch NEXT on the initial menu.
2 Touch TEL/GUIDE to select any of the
muting, attenuation, mixing or off.
Touch TEL/GUIDE until the desired setting ap-
pears in the display.
! MUTE  Muting
! ATT 20  Attenuation (ATT 20 has a stron-
ger effect than ATT 10)
! ATT 10  Attenuation
! OFF  Turn the sound muting/attenuation
off
Notes
! The sound is turned off or attenuated, MUTE
or ATT are displayed and no audio adjustment
is possible.
! Operation returns to normal when the phone
connection or the voice guidance is ended.