Setting The Aspect Ratio; Setting The Parental Lock - Pioneer AVH-P5750DVD Operation Manual

Av receiver/dvd player with 6.5 inch wide display
Hide thumbs Also See for AVH-P5750DVD:
Table of Contents

Advertisement

Section
16
Setting up the DVD player

Setting the aspect ratio

There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to VIDEO OUTPUT.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16 : 9
may result in an unnatural picture.
! If you select the TV aspect, the units dis-
play changes to the same setting.
1
Touch SETUP and VISUAL and then
touch TV ASPECT.
2
Touch any of the following touch panel
keys to select the TV aspect.
! 16 : 9  Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX  The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PANSCAN  The picture is cut short at the
right and left of the screen
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX
even if you select PANSCAN setting. Confirm
whether the disc package bears the
mark. (See page 10.)
! Some discs do not enable changing of the TV
aspect. For details, refer to the discs in-
structions.

Setting the parental lock

Some DVD video discs let you use parental
lock to restrict the viewing of violent and adult-
oriented scenes by children. You can set the
parental lock level in steps as desired.
82
En
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1
Touch SETUP and VISUAL and then
touch PARENTAL.
2
Touch 09 to input a four digit code
number.
3
While the inputted number is dis-
played, touch ENTER.
The code number is set, and you can now set
the level.
4
Touch any of 18 to select the desired
level.
The parental lock level is set.
! LEVEL 8  Playback of the entire disc is pos-
sible (initial setting)
! LEVEL 7LEVEL 2  Playback of discs for
children and non-adult-oriented discs is
possible
16 : 9 LB
! LEVEL 1  Playback of discs for children
only is possible
Notes
! We recommend to keep a record of your code
number in case you forget it.
! The parental lock level is recorded on the disc.
You can confirm it by looking at the disc pack-
age, included literature or on the disc itself.
With discs that do not feature a recorded par-
ental lock level, you cannot use parental lock.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents