Installing And Removing Blade Components; Customer And Field Replaceable Units-Poweredge M830 - Dell PowerEdge M830 Owner's Manual

Installing and removing blade
components
This section provides information on installing and removing the blade components. For information on
installing and removing the enclosure components, see the enclosure Owner's Manual at dell.com/
poweredgemanuals.
Customer and field replaceable units—PowerEdge M830
The following components are Customer Replaceable Units (CRUs):
• Cooling shroud
• Memory module
• mezzanine card
• Internal Dual SD Module (IDSDM) card
• SD vFlash card
• SD cards
• rSPI card
• Network Daughter Card (NDC)
• System board battery
• Hard drives/SSDs
• Hard drive/SSD cage
• 2.5 inch (x4) SAS backplane
• 2.5 inch (x4) SATA backplane
• 2.5 inch (x2) SATA plus 2.5 inch (x2) PCIe backplane
• 1.8 inch (x12) SAS SSD backplane
The following components are Field Replaceable Units (FRUs).
NOTE: Removal and installation procedures of the FRUs should be performed only by Dell certified
service technicians.
• Storage controller card
• Expander card
• System board
• Processors
• Heat sinks
• Trusted Platform Module (TPM)
36
4