Removing A Hard Drive/Ssd Blank - Dell PowerEdge M830 Owner's Manual

The status LED indicator displays a steady green light if the drive is installed correctly. The drive
carrier LED green indicator flashes as the drive rebuilds.

Removing a hard drive/SSD blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To maintain proper system cooling, all empty hard drive/SSD slots must have hard
drive/SSD blanks installed.
1. Ensure that you read the
Steps
Press the release latch and slide the hard drive/SSD blank out of the hard drive/SSD slot.
Figure 28. Removing and installing a 2.5 inch hard drive/SSD blank
1. hard drive/SSD blank
82
Safety instructions.
2. release latch