Installing A Blade - Dell PowerEdge M830 Owner's Manual
Hide thumbs
Also See for PowerEdge M830:
- Owner's manual (131 pages) ,
- Owner's manual (169 pages) ,
- Getting started (2 pages)
Table of Contents
Advertisement
Figure 5. Removing or installing the blade
1.
release button
3.
enclosure
Related Links
Installing a blade
Installing a blade
Prerequisites
Ensure that you read the
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
If you are installing a new blade, remove the plastic cover from the I/O connector(s) and save for
future use.
2.
Orient the blade so that the handle is on the left side of the blade.
3.
If you are installing the full-height blade in bays 3 or 4, rotate the LCD module to the horizontal
storage position to prevent accidental damage to the LCD screen.
4.
Align the guide rail on the upper edge of the blade so that the rail fits between the plastic guides on
the enclosure.
5.
Slide the blade into the enclosure until the handle engages and locks the blade in place.
Safety
instructions.
2.
blade
39
Advertisement
Table of Contents
Troubleshooting
