Cooling Shroud; Removing The Cooling Shroud - Dell PowerEdge M830 Owner's Manual

Cooling shroud

Removing the cooling shroud

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Never operate your system with the cooling shroud removed. The system may get
overheated quickly, resulting in shutdown and loss of data.
NOTE: You must remove the cooling shroud to service other components inside the system.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
Hold the cooling shroud at both ends and lift it away from the system.
Figure 8. Removing and installing a cooling shroud
1. cooling shroud
3. guide pin (2)
Next steps
Install the cooling shroud.
Related Links
Installing the cooling shroud
Removing the blade
44
Safety instructions.
Before working inside your system.
2. tab (4)