KCT DSP-40 User Manual page 59

3) You can see installed HDD. Additional HDD can be installed in specified position as this picture.
POWER
4) Connect data cable and power cable to additional HDD.
▶ Set up master/slave of HDD by jumper setting.
▶ Connect cables refer to this picture.
The front side
Data Cable
Connecting to HDD1
Connecting to HDD3
▶ In case of HDD3 and HDD4 is the same thing.
Korea Computer Technologies, co., ltd
The rear side
HDD2
(Slave)
HDD1
(Master
The front side
HDD1
HDD4
(Slave)
HDD3
(Master
The rear side
Power Cable
HDD2
8. APPENDIX
57