KCT DSP-40 User Manual page 37

2) CAMERA NAME
INSTALLED CAMERA
CAMERA 1 NAME
CAMERA 2 NAME
CAMERA 3 NAME
CAMERA 4 NAME
CAMERA NAME DISPLAY
SWITCHING TERM
▶Set up camera name to be displayed in screen.
① Using LEFT/RIGHT direction key, select character to be set up. Selected character twinkles..
② Using UP/DOWN direction key, changes character. English character, number, special symbol
can be used.
Default form is this : "CAMERA(camera number)"
3) CAMERA NAME DISPLAY
▶ Set up if current time in the bypass screen displays or not..
① Using UP/DOWN direction key, select ON or OFF.
② Default selection is ON.
4) SWITCHING TERM
▶ Set up switching term by second unit.
① from 1 to 10 sec can be used.. Default value is 5.
Korea Computer Technologies, co., ltd
CAMERA
CC--
STREET
DOOR
DESK 1
DESK 2
ON
03
4. SETUP - camera
35