KCT DSP-40 User Manual page 34

DSP-40
6) CHANGE PASSWORD
SYSTEM
SYSTEM ID
TIME SET
COMMUNICATION
DISK INFO
ALARM LIST
CHANGE PASSWORD
DIGITAL OUTPUT SET
▶Change current password to new password.
▶Pressing ESC button while input, input value is invalidated, and return to previous screen.
① Using display key, input 8 digit number consisting integer from 1 to 4. Using UP/DOWN
direction key, input value in all 3 item.
② Input password does not match with current password, message "WRONG CURRENT
PASSWORD" is displayed, and return to previous screen.
③ Though input password matches with current password, if input value in "NEW PASSWORD"
is not similar to the value in "NEW PASSWORD AGAIN", message "PASSWORD NOT
CHANGED" is displayed and return to previous screen.
④ If all value is inputted successfully, message "PASSWORD CHANGED SUCCESSFULLY" is
displayed, and return to previous screen. New password is valid at the next setup mode.
- When mode return from SETUP to Bypass,, New password is renewed,
Warning!
- Forgetting password, ask help to your agency.
32
01
CHANGE PASSWORD
CURRENT PASSWORD
NEW PASSWORD
NEW PASSWORD AGAIN --------
--------
--------