KCT DSP-40 User Manual page 10

DSP-40
1) Camera connection
Connect camera to CAMERA INPUT of backward of system.
2) Monitor connection
Connect monitor to MONITOR OUTPUT of backward of system.
3) Sensor connection (optional)
Connect sensor to SENSOR IN of backward of system.
4) Network connection (optional)
Construct RS232C, Modem and LAN connection referring to below network connection diagram.
5) Power connection
Connect power cable to power connection of backward of system, and turn on the power switch
of forward of system.
3. Network connection and serial cable connection
1) RS232C serial connection
8
RS232C
9pin
2
Rx
3 Tx
Gnd
5
Femal e
9pin
2
Rx
3
Tx
Gnd
5
Femal e