4-1) DISK FORMAT
▶Using UP/DOWN direction key, select disk to be formatted.
▶Pressing ENTER button, confirm message is displayed, and pressing again, disk formatting
starts.
▶Formatting procedure is displayed by the ratio of formatted storage to total storage.
▶When the formatting finishes, the information of disk is displayed.
▶ If user attempt to format disk while recording, message "Formatting DISK 1 FAILED"(in case of
disk #1) is displayed and format fails. Stop recording and retry format.
Formatting disk erase all data forever, so you must be very careful.
Warning!
5) ALARM LIST
SYSTEM ID
TIME SET
COMMUNICATION
DISK INFO
ALARM LIST
CHANGE PASSWORD
DIGITAL OUTPUT SET
▶ Show sensor input history.
SYSTEM
01
2 : 2001. 07. 06 14:23:38 CAM4
3 : 2001. 07. 06 16:03:16 CAM3
4 : 2001. 07. 06 20:33:19 CAM2
5 : 2001. 07. 06 20:33:20 CAM4
6 : 2001. 07. 06 20:43:50 CAM4
7 : 2001. 07. 07 09:03:20 CAM1
8 : 2001. 07. 07 11:23:42 CAM3
Korea Computer Technologies, co., ltd
ALARM LIST
1 : 2001. 07. 06 11:03:20 CAM1
4. SETUP - system
31