KCT DSP-40 User Manual page 20

DSP-40
1. Recording by Button
1) If user press recording button, the button emits light, recording icon is displayed, and recording
starts immediately.
2) Recording by button can be started in any status(bypass, replay and setup mode), but not in
password input screen.
3) Pressing recording button again in recording mode, recording finishes and the button light is
disabled and displayed icon is erased.
2. Reserved Recording
1) According to day of the week : by setting specific time range
▶ User can set enable reserved recording function on not each weekday (from Monday to
Friday), Saturday, Sunday.
▶ User can set start time and end time of recording by hour and minute unit.
▶ Refer to appropriate part of this manual.(p38)
2) According to specific day : by setting specific time range
▶ Max 8 time-range can be set.
▶ User can set start time and end time of recording by month, day, hour and minute unit.
▶ Refer to appropriate part of this manual.(p38)
3. Recording by Event of Sensor
1) If event of sensor arises, recording starts in the channel connected that sensor.
2) Recording keeps up until the time set in setup mode, RECORD→SENSOR TIMEOUT
item.(p38)
3) With event of sensor, the sensor-icon is displayed in the screen connected sensor
18