KCT DSP-40 User Manual page 50

DSP-40
③ Clicking "Phonebook", sub menu of "Setup" menu, you can set up remote name and
telephone number using in modem communication.
④ Clicking "Update" after inputting name and telephone number, system registers that
automatically. If you want to modify name or number, click "Update" after modify. When updating,
confirm message as below is displayed. If you want to delete name, select name and click
"Delete".
2. Transmission, save, print image through serial port
1) Preparation of transmission
① Construct network referring to page 9 in this manual, and execute DVR DIALUP program.
② Referring to previous "1. Set up "DVR DIALUP", set up "DEVICE" and "BAUD RATE". In the
status bar, message "online" is displayed.
2) Transmission, save, and print bypass image
① Use only bypass mode of DVR.
② Clicking "Request Current Image", sub menu of "Commands" menu, bypass image is
transmitted. Transmission rate is displayed. Transmission repeats over and over periodically.
48