Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15 3000 Series Service Manual

Replacing the I/O board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw hole on the I/O board with the screw hole on the
computer base.
2 Replace the screw that secures the I/O board to the computer base.
3 Slide the I/O-board cable into its connector on the I/O board and close
the latch to secure the cable.

Post-requisites

1 Follow the procedure from step 2 to step 6 in
2 Replace the keyboard.
3 Follow the procedure from step 3 to step 6 in
4 Replace the base
5 Replace the battery.
computer. After working inside your
panel.
After working inside your
"Replacing the palm
"Replacing the hard
rest".
drive".
53