Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15 3000 Series Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery.
2 Remove the
3 Follow the procedure from step 1 to step 3 in
4 Remove the
5 Remove the
6 Remove the keyboard.
7 Follow the procedure from step 1 to step 8 in
8 Follow the procedure from step 1 to step 7 in
board".

Procedure

1 Turn the computer over and open the display as far as possible.
2 Note the antenna-cable routing and remove the antenna cables from the
routing guides on the computer base.
70
computer. After working inside your
base panel.
memory module.
wireless card.
After working inside your
"Removing the hard
"Removing the palm
"Removing the system
drive".
rest".