Replacing The Palm Rest; Procedure; Post-Requisites - Dell Inspiron 15 3000 Series Service Manual

Replacing the palm rest

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Replace the touch
2 Align the screw holes on the palm rest with the screw holes on the
computer base and snap the palm rest into place.
3 Replace the screws that secure the palm rest to the computer base.
4 Slide the touch-pad cable and the power-button cable into the
connectors and close the latches to secure the cables.
5 Turn the computer over.
6 Replace the screws that secure the palm rest to the back cover.

Post-requisites

1 Replace the keyboard.
2 Follow the procedure from step 3 to step 6 in
3 Replace the base
4 Replace the battery.
computer. After working inside your
pad.
panel.
After working inside your
"Replacing the hard drive".
37