Table of Contents
Advertisement
Answering system
Message counter displays
The message counter usually displays the total
number of answering system messages. See the table
below for other message counter displays.
Message counter displays
0
0 (flashing)
1-99
1-99 (flashing)
10-99
1-99 (counting)
99 (flashing)
F (flashing)
--
-- (flashing)
02, 04, 06,
tS
1-8
HI, LO, OF
52
No messages.
The clock needs to be set (page 42).
Total number of messages and memos, or
message number currently playing.
Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
After a power failure, the number in the
message counter will flash to indicate the
clock needs to be set.
Current remote access code while setting
(page 48).
Elapsed time while recording a memo
(page 51) or announcement up to 90
seconds (page 44).
A memo recording is longer than 99
seconds.
Memory is full. Messages must be deleted
before new messages can be recorded.
The system is answering a call, being
accessed remotely, or the clock is being
set.
The system is being setup, initialized or
messages are being deleted.
Displayed while setting the number of
rings (page 47).
Displayed for two seconds while adjusting
the telephone base speaker volume.
Displayed for two seconds while adjusting
the telephone base ringer volume.
Advertisement
Table of Contents
