Table of Contents
Advertisement
Getting started
Belt clip & optional headset
To attach the belt
clip:
Snap the belt clip
into the retaining tabs
on both sides of the
handset as shown in the
figure.
For handsfree telephone conversations, you can use any industry standard
2.5 mm headset (purchased separately). For best results, use an AT&T 2.5
mm headset. To purchase a headset, visit our website at
www.telephones.att.com
1 (866) 288-4268.
Plug a 2.5 mm headset
into the jack on the side
of handset (beneath the
small rubber flap).
visit our website at
1 (800) 222-3111.
or call
Lift the rubber
flap here.
Side of handset
9
To remove the belt
clip:
Gently lift either of the
belt clip retaining tabs,
shown in the figure,
outwards to remove
the belt clip from the
handset.
In Canada dial
Advertisement
Table of Contents
