4.2 Battery Charging
1. Connect power cord and plug it into power outlet
2. Check that the status light for LiPo is illuminated. If it is not, press the Start/Stop/Select button to select
LiPo
3. Connect charging cable to charger by connecting the red cable into the red port and the black cable into
the black port
4. Connect the balance plug of the battery into the 3 cell port on the charger
5. Connect the yellow power connector of the battery to the power connector of the charger
6. Begin charging by pressing and holding the Start/Stop/Select button until the charger beeps and the
status light turns red
7. Once the battery is charged the status light will turn green and the charger will beep
Pg. 12
v.1.1