Table of Contents
Advertisement
7. Maintenance
This section has information on how to keep your X PlusOne flight ready.
7.1 Operational Limits
Maximum altitude
Range
Maximum estimated flight time
Payload capacity
7.2 Software Updates
Visit www.xcraft.io regularly to check for the latest version of all software
7.3 Repair
Information on user serviceable components and non-serviceable components
7.3.1 Propellers
Always balance all propellers used on your X PlusOne. Balanced propellers will greatly improve
performance and allow clearer images from onboard cameras. To balance propellers, follow the
recommended procedures below.
1. Insert a rod into the hole in the center of the propeller
2. Allow propeller to freely rotate and make note of which blade points up, this is the "light" blade
3. Add weight to the light blade. This can be done by adding a small piece of tape or nail polish to
the underside of the propeller blade.
4. Repeat steps 2 and 3 until the propeller balances horizontally on the rod
Pg. 22
TIP: For best results use a propeller balancer
light blade
400 ft
0.5 miles
22 min
1 lbs
heavy blade
v.1.1
Advertisement
Table of Contents
