Charge Battery - xCraft X PlusOne Quick Start Manual

3. Install Payload:
1. For the standard nosecone, install as shown in the image below using the supplied hardware:
long screws, washers, and nuts.
2. For all other payload options, follow the instructions included with the payload.
Long screws

4. Charge Battery:

1. Connect charger power cord and plug the charger into wall outlet.
2. Check that blue lights flash on charger.
3. Plug the battery balance cable into the middle port of the charger. It is the only port that will fit that
size plug and it only goes in one way to ensure an easy connection.
4. Determine how charged your battery is by the light up indicators on the charger.
5. When fully charged (100%), unplug the battery from the charger and the charger from the outlet.
battery
balance
cable
power cord
washers
nuts