Sleep Button; Feel Button; Timer On / Timer Off Button - Toyotomi TRN/TRG-528ZR User Manual

Introduction for buttons on remote controller
this button again within 2s, the change of swing status will also depend on the
circulation sequence stated above.
8

SLEEP button

Under COOL, HEAT or DRY mode, press this button to start up sleep function.
" " icon is displayed on remote controller. Press this button again to cancel sleep
function and "
the unit is turned off, the Sleep function is canceled.
In this mode, the time of time can be adjusted. Under Fan and Auto modes, this
function is not available.
9
I FEEL button
Press this button to start I FEEL function and "
controller. After this function is set, the remote controller will send the detected
ambient temperature to the controller and the unit will automatically adjust the
indoor temperature according to the detected temperature. Press this button again
to close I FEEL function and "
the remote controller near the object of high temperature or low temperature in
order to avoid detecting inaccurate ambient temperature.
10

TIMER ON / TIMER OFF button

TIMER ON button
"TIMER ON" button can set the time for timer on. After pressing this button, "
" "button to adjust TIMER ON setting.
later, the time will change quickly until reaching your required time.
resumes displaying. Cancel TIMER ON: Under the condition that TIMER ON is
started up, press "TIMER ON" button to cancel it.
TIMER OFF button
"TIMER OFF" button can set the time for timer off. After pressing this button, "
" " button to adjust TIMER OFF setting.
later, the time will change quickly until reaching your required time.
Press "TIMER OFF" word "OFF" will stop blinking. "
Cancel TIMER OFF. Under the condition that TIMER OFF is started up, press
"TIMER OFF" button to cancel it.
B
" icon will disappear.After powered on, Sleep Off is defaulted. After
" will disappear.
" will be displayed on the remote
" icon resumes displaying.
13
"
"
GB