Neaten The Pipes; Outdoor Condensate Drainage - Toyotomi TRN/TRG-528ZR User Manual

Installation of outdoor unit
2. Fix the power connection wire and signal control wire with wire clip (only for
cooling and heating unit).
Note:
Step six: neaten the pipes
1. The pipes should be placed along the wall,
bent reasonably and hidden possibly. Min.
semidiameter of bending the pipe is 10cm.
2. If the outdoor unit is higher than the wall
pipe before pipe goes into the room, in
room.

Outdoor Condensate Drainage

During heating operation, the condensate and defrosting
water should be drained out reliably through the drain hose.
the base plate and attach the drain hose to the connector
so that the waste water formed in the outdoor unit can be
Whether to plug other holes will be determined by the dealers
to actual conditions.
The 09K 、 12K 、 18K 、 24K UNIT drainage hole
drain plug consists of one
(The figures in this manual may be different with the material
objects, please refer to the material objects for reference)
Drain plug
Drain connecter
inner dia. 16mm)
ole on
ugged.
Didney holes
Didney holes
40
wall
drain hose
09K 12K UNIT:
Drain-water hole
Bottom frame
18K UNIT:
Didney holes Drain - water hole
Bottom frame
24K UNIT:
Didney holes Drain - water hole
Bottom frame
Didney holes
GB