Call Transfer Using Intercom - AT&T SL81108 User Manual

Telephone operation
INT

Call transfer using intercom

Use the intercom feature to transfer an outside
call from one handset to another. Unless additional
handsets have been registered, this feature is not
available on model SL81108.
Model SL81208
1. When on an outside call, press INT. The outside
call is automatically placed on hold. The
transferring set's screen will show CALLING
OTHER HANDSET. The called handset will ring,
and its screen will show OTHER HANDSET IS
CALLING.
2. On the ringing handset, press PHONE
INT, SPEAKER, or any dial pad key (0-9, * or
#) to answer the intercom call. You can now
talk without the outside caller hearing the
conversation.
OFF
3. Press
/CLEAR
or place it in the telephone base or handset
charger to complete the transfer. The transferring
handset's screen will show CALL TRANSFERED
and the other handset will automatically be
connected to the outside call.
NOTES:
1. Before the intercom call is answered, you can cancel
the transfer and return to the outside call by pressing
OFF/ ,
CLEAR
2. If the called handset does not answer the intercom call
within 100 seconds, is in directory or caller ID history
mode or is or out of range, the transferring handset will
show UNABLE TO CALL TRY AGAIN on its screen and will
automatically return to the outside call.
3. You can switch between the intercom call and the outside call
by pressing INT on the transferring handset. The display will
alter between INTERCOM and OUTSIDE CALL to indicate
which call is active.
4. You can end the intercom call and return to the outside call by
pressing PHONE/
5. If you register an accessory handset to your SL81108 (for a
total of two handsets), call transfer using intercom will be the
same as model SL81208.
30
on the transferring handset
PHONE/ , or INT.
FLASH
on the transferring handset.
FLASH
Unless additional
,
/FLASH