Side Buttons; The Lithium-Ion (Li-Ion) Battery - Motorola XTNiD User Manual

A
• Programmable Button
Default set to generate the current
programmed call tone.
• Programmable Button
B
Default set to preset channel 1
• Programmable Button
C
Default set to preset channel 2
Note: A short press of either preset button (B or C)
tunes the radio to the preset channel and the
radio will play a good chirp. You can assign
different functions to these buttons via the
CPS. For example: Backlight Time Out,
Reverse Burst, Power Select, Scan/
Nuisance Channel Delete, Monitor and Call
Tones. To learn more about how to program
these buttons refer to "Entering
Programming Mode" on page 20 and "CPS
8
English
(Computer Programming Software)" on
page 21.

Side Buttons

• Push-to-Talk (PTT) Button
Press and hold down this button to talk,
release it to listen.
• Side Button 1 (SB1)
The Side Button 1 is a general button that can
be configured by the CPS. The default setting
of the SB1 button is "Monitor".
• Side Button 2 (SB2)
The Side Button 2 is a general button that can
be configured by the CPS. The SB2 button
default setting is 'Scan/Nuisance Channel
Delete'.

The Lithium-Ion (Li-Ion) Battery

XTNi™ Series provides different types of
batteries.