Table of Contents
Advertisement
Custom Detection Host
4.1.3LAN
The LAN Port screen below allows you to specify a private IP address for your router's LAN interface.
Parameters
Internal IP address
IP Address
Subnet Mask
Spanning Tree Protocol
MTU
4.1.4Routing
Click on [Setup] – [Routing] tab. You will see the following screen.
whether the connection is still connected.
If custom host is chosen, the system will generate an ARP broadcast
request to detect whether the connection is still connected.
Enter the IP address or domain name of the host to be detected.
Description
Please input the IP address of this router.
Designate the Access Point's IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.0.1.
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.
If it is enabled, this router will use the spanning tree protocol to prevent
from network loop happened in the LAN ports.
MPLANETum Transmission Unit
21
Advertisement
Table of Contents
