Symbol LS 4000P Series Product Reference Manual page 22

LS 4000P Series Product Reference Guide
Changing the Battery
1. To open the battery box, push up on the flanges at one end of the pack.
2. Remove the old battery.
3. Insert the new or recharged 9-volt battery into the battery box. Match the
positive (+) and negative (-) pole indications on the battery with the corresponding
pole indications in the battery box.
Recharging a Nickel-Cadmium Battery
Remove the battery from the battery box and place it in the recharging unit (not supplied by
Symbol).
To recharge the battery, follow the instructions supplied with the recharging unit.
2-4