Adjusting The Shift Speed Rpm 1; Adjusting The Shift Speed Rpm 2 - KTM 125 Duke EU 2015 Owner's Manual

6 CONTROLS

6.13.22 Adjusting the shift speed RPM 1

6.13.23 Adjusting the shift speed RPM 2

Condition
The ignition is on.
The motorcycle is stationary.
–
Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
–
Press the MODE button for 5 - 10 seconds.
The display RPM 1 appears.
Info
The engine speed can be set at intervals of 50.
RPM 1 is the engine speed above which the shift warning light starts to flash.
–
Set the speed with the MODE and SET buttons.
401307-01
Info
The MODE button increases the value.
The SET button decreases the value.
–
Do not activate the two buttons for approx. 15 seconds.
The display RPM 1 goes out and the set speed is stored.
Condition
The ignition is on.
The motorcycle is stationary.
48