KTM 125 Duke EU 2015 Owner's Manual page 90

11 SERVICE WORK ON THE CHASSIS
(Option: With ABS)
–
Loosen nut
–
Loosen nuts
–
Adjust the chain tension by turning adjusting screws
Guideline
Chain tension
Turn adjusting screws
left and right chain adjusters
marks
–
Tighten nuts
–
Make sure that chain adjusters
–
Tighten nut
S00669-10
Guideline
Nut, rear wheel spindle
Finishing work
–
Take the motorcycle off of the rear wheel stand. (

.
 .

on the left and right so that the markings on the

are in the same position relative to reference
 . The rear wheel is then correctly aligned.
Info
The upper chain section must be taut.
Chain wear is not always even, so you should check the setting at different
chain positions.

.


.

on the left and right.
5... 7 mm (0.2... 0.28 in)
are fitted correctly on adjusting screws
M14x1.5
p. 77)
88

.
90 Nm
(66.4 lbf ft)