Casio FX-730P Owner's Manual page 85

4-7 Convenient Peripherals
• Program Storing and Loading
Sometimes the program cannot be stored because of the capacity of free area.
If
the previous program is erased, it cannot be used again. In cases of this nature,
the cassette interface is very helpful.
Commands for storing programs on a cassette tape are "SA VE" or "SA VE
ALL". "SAVE" can only store a program located in a single program area, while
"SA VE ALL" can simultaneously store programs located in all program areas.
SA VE Command
F'.e . 3 dy Pn
I
SA VE ALL Command
[ The program located in this program area
can be stored.
Programs located in all program areas can be stored.
The SA VE and SA VE ALL commands are manually executed.
Example:
SAVE~
SAVE "CASIO"
~
SAVE ALL
~
SAVE ALL "FX''
~
Characters enclosed with the quotation marks (") after SAVE and SAVE ALL
are file names which are placed with stored programs. These programs can be
loaded later by specifying these names. Up to 8 characters can be used for a
file name .
LOAD and LOAD ALL commands are used to load programs from a cassette
tape to the computer. The proper use of these commands depends on whether
programs were stored by SA VE or SA VE ALL.
75