On "' Goto - Casio FX-730P Owner's Manual

1-2 Functions of Components
• Memo
Key(~)
Pressed to use the Data Bank function . Also pressed for sequential recall or for
recall after pressing a specified character in the RUN mode (press
~~)
or in
the input mode
(press~§)).
• All Clear Key (
~
)
This key erases any display . Also, it is pressed when an error occurs, or when the
display blanks out by auto power off (see page 12). When a program is being
executed, program execution is suspended by pressing this key .
• Delete/Insert Key (
~
)
This key is used to delete a character where the blinking cursor is positioned.
After deletion, the character to the right of the cursor moves to the left. When it
is pressed after the
8
key, the character where the blinking cursor is positioned
is moved to the right to provide a space .
• Engineering/Stop Key (
5 f~t)
When this key is pressed, a calculation result or a numeric value displayed by a
PRINT statement is converted into an exponent display. When this key is
pressed repeatedly , the displayed exponent will decrease by 3 each time. The
exponent can be increased by 3 each time by pressing 8 6 .
When pressed during program execution, this temporarily suspends program
execution. When it is pressed while characters are being scrolled, the display is
temporarily suspended. Execution is resumed when the
§1
key is pressed.
7