Casio FX-730P Owner's Manual page 111

6-1 Manual Commands
Function:
Displays program contents or the variable names and subscripts of the declared
arrays.
Parameter:
Line No.:
ALL:
V:
Explanation:
1. RUN Mode
No. of the first line to be displayed.
Displays the contents of all PO ,.;., P9 programs sequen-
tially.
Displays variable names and subscripts of the declared
arrays.
1) Sequentially displays the content of a program from a line number if it is
specified, or from the beginning if it is omitted.
2) Since the content of a program is automatically displayed sequentially, press
the
~
key to stop this. Press the
0
key to display the next line and after.
3) Array variable names are displayed in sequence one at a time. Press
0
to dis-
play the next array variable name.
4) In the PRINT mode (when "PRT ON" is displayed), the display is not
stopped but is made sequentially at high speed.
2. WRTMode
1) Displays the content of a program from a line number if it is specified, and
from the beginning if it is omitted .
2) Since each line is displayed for edit in the WRT mode, if edit is not required,
press the 0 key to advance to the next line. Also, if the
§I
key is pressed
before the
0
key, the previous line is displayed.
3) The array variable name is displayed one at a time with LIST V. Press
0
and
the next array variable name will be displayed.
101