Adding And Inserting Data - Casio FX-730P Owner's Manual

192
7- 7 Adding and Inserting Data
It is possible to add a new data next to the last record or to insert a new record
between stored records.
I) Adding Data
DEG
If the MEMO IN mode is specified, the computer will go into the key-input
waiting state and the record number will be displayed. Record number 11 is
displayed and the cursor is blinking in the above example. The computer is
waiting for input of data for Record 11. This also means that data for 10 records
have already been stored.
A new data will be stored in Record 11 by pressing
~
.
2) Inserting Data
To insert new data between stored records, first specify the MEMO IN mode and
display the record where the new data will be stored. Next, input the data to be
inserted and press
§il~
.
(Be careful here since pressing
~
only will cause the
data to be stored in a record next to the last record.)
For example, assume we wish to insert the HOYT's data between FOX's data in
Record 3 and JONES' data in Record 4. First, display the JONES' data in the
MEMO IN mode .
BUZZER
DEG
·-:
JONES,052-031 -6221
Next, enter the initial character[[) of the HOYT. The previous display will be
cleared and "H" will be displayed. Continue entering the HOYT's data .
[[)
[Q]CTJCTJC!J~§JB~§@J
B~§J(g)W
BUZZER DEG
HMQJ [JID
H_
BUZZER DEG
~
[JID
~ffi'/T
-
n\-nc:;4-4-::··::1·
• - I • ' - ·- - · -
,_1.&:,.. -
'i
'i