Executing A Program - Casio FX-730P Owner's Manual

4·2 Executing a Program
To execute a stored program, specify the RUN mode by
pressing~(@.
The
display will then appear as shown below.
rSymbol indicating the RUN mode.
]
LProgram area number currently specified.
The program in the currently specified program area will start if the RUN com-
mand is executed here. If the previously stored program is executed, it will be as
shown below.
(Program starts.)
(2 is entered for x.)
(The value of y is displayed.)
(Jumps to line 10.)
x=?
.-,
.L _
y=
315
::r~=?
To pause execution of a program, press
the~
key. "STOP" will then appear at
the upper right part of the display and the execution will stop. If
the~
key is
pressed again, the currently specified program area number and the stopped line
number will be displayed. Execution of the program will resume
when~
is
pressed.
BUZZER
RUN DEG
::::=
-,
;
BUZZER
RUN DEG
STOP
STOP
-,
=
~.:::
=
;
BUZZER
RUN DEG
STOP
~
(Stops at line 10.)
F'0-10
BUZZER
~
(Resumes execution.) .-,
RUN DEG
. .
55