Casio FX-730P Owner's Manual page 137

6-2 Program Commands
3) Write as follows in case of array variables defined in the DIM mode .
PUT A(S), A(9) ... . .. .. Contents of A(S) , A(6), A(7), A(8), A(9)
PUT A(0,0,1), A(l,0,0) ... Contents of A(0 ,0,1), A(0,0,2), A(0,1,0),
A(0,1,1), A(0,1,2), A(0,2 ,0), A(0 ,2,1), A(0,2,2)
and A(l ,0,0) when DIM A(2 ,2,2) is defined.
PUT A$(*) . . . . . . . . . . . Stores all array contents of A$ . Will be PUT
A$(*) regardless of whether the array is two-
dimensional or three-dimensional. Two or more
array variables cannot be stored with one PUT
statement.
*Write as follows in case of array variables defined in the DEFM mode.
PUT A, A(S) . . . . . . . . . . Contents of the six variables A
~
A(S).
This is the same as PUT A, F.
PUTZ, Z(20) . . . . . . . . . . Contents of the 21 variables Z
~
Z(20).
4) Can be executed both manually and in a program.
5) $ need not be attached even when using a character variable.
Example :
Enter PUT A,D when A and C are numeric variables and B and D are character
variables.
PUT A,D
127