Casio FX-730P Owner's Manual page 24

14
CHAPTER 1 General Guide
• After installing or removing the RAM pack, be sure to press the ALL
RESET button with a pointed object. If the ALL RESET button is not
pressed, the memory contents may be changed or a meaningless display
may be shown.
• Use care not to allow the connector portion of the pack or the PCB pad
portion of the computer body to become dusty or dirty, and avoid getting
fingerprints on them as this will cause poor contact.
• Be sure to place the removed pack in its case and store in a location where
it is not subject to dust or dirt.
f