Shark CD-232437 Operator's Manual
  1. Manuals
  2. Brands
  3. Shark Manuals
  4. Pressure Washer
  5. CD-232437
  6. Operator's manual

Shark CD-232437 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATOR'S MANUAL
To locate your local Shark Commercial Pressure Washer Dealer nearest you,
MODEL
CD-232437
CD-232336
visit www.shark-pw.com
ORDER #
1.107-152.0
1.107-153.0
8.919-016.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-232437 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Shark CD-232437

Summary of Contents for Shark CD-232437

  • Page 1 OPERATOR’S MANUAL MODEL ORDER # CD-232437 1.107-152.0 CD-232336 1.107-153.0 To locate your local Shark Commercial Pressure Washer Dealer nearest you, visit www.shark-pw.com 8.919-016.0...

  • Page 2: Table Of Contents

    CONTENTS Important Safety Information ..............2-3 Component Identifi cation ................. 4 Assembly Instructions ................5 Operating Instructions................6-7 Applying Detergent and General Operating Techniques ......8 Shut Down and Clean-Up ................ 9 Storage ....................9 Troubleshooting ................10-11 Preventative Maintenance ..............12 Oil Change Record ................12 Hose and Spray Gun Assembly .............

  • Page 3: Important Safety Information

    INTRODUCTION & IMPORTANT SAFETY INFORMATION Thank you for purchasing this Pressure Washer. 4. All installations must comply with local codes. Contact your electrician, plumber, utility company We reserve the right to make changes at any time or the selling distributor for specifi c details. without incurring any obligation.

  • Page 4: Important Safety Information

    IMPORTANT SAFETY INFORMATION WARNING: Keep wand, hose, and WARNING: High pressure devel- WARNING WARNING water spray away from electric oped by these machines will wiring or fatal electric shock may cause personal injury or equip- result. ment damage. Keep clear of Do not spray water on or near nozzle.

  • Page 5: Component Identifi Cation

    COMPONENT IDENTIFICATION Engine Unloader Detergent Bucket (Not Included) Inlet Water Pump Water Supply Hose (Not Included) Inlet Connection Detergent High Pressure Hose Hose Quick Coupler Spray Gun Wand High Pressure Nozzle Trigger Soap Nozzle Swivel Connector Detergent Injector - Allows you to siphon and mix Spray Gun —...

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Spray Safety Latch Nozzle Extension Spray Gun/ Wand High Pressure Hose STEP 1: Attach the high pressure STEP 2: Attach nozzle extension STEP 3: Before installing nozzle, hose to the spray gun using tefl on to spray gun/wand. Tighten both turn on water supply and run ma- tape on hose threads.

  • Page 7: Operating Instructions

    OPERATING INSTRUCTIONS Oil Dipstick Stick STEP 1: Check engine oil level. Oil level should be level with the bottom STEP 2: Remove shipping cap and of the oil fi ller neck. Be sure the machine is level when checking the oil install oil dipstick.
  • Page 8 OPERATING INSTRUCTIONS On-Off Switch STEP 8: On Honda engines, turn the engine switch to STEP 9: Pull the starter grip. If the engine fails to start "On" position. after 2 pulls, squeeze the trigger gun to release pressure and repeat step. Return starter gently. After the engine On Briggs engines, move the throttle lever to "Fast"...

  • Page 9: Applying Detergent And General Operating Techniques

    DETERGENTS AND GENERAL OPERATING TECHNIQUES WARNING: Some detergents charging the warm water onto the ground. This thermal WARNING device prevents internal damage to the pump. may be harmful if inhaled or in- gested, causing severe nausea, CLEANING TIPS fainting or poisoning. The harm- ful elements may cause property Pre-rinse cleaning surface with fresh water.

  • Page 10: Shut Down And Clean-Up

    SHUTTING DOWN AND CLEAN-UP On-Off Switch STEP 1: Remove detergent suction STEP 2: Move the throttle to stop STEP 3: Turn off water supply. tube from container and insert into the engine (Briggs Engine). Turn off one gallon of fresh water. Slide nozzle the engine (Honda engines).

  • Page 11: Troubleshooting

    TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION LOW OPERATING Faulty pressure gauge Install new gauge. PRESSURE Insuffi cient water supply Use larger garden hose; clean fi lter washer at water inlet. Old, worn or incorrect spray nozzle Match nozzle number to machine and/or replace with new nozzle.
  • Page 12 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PRESENCE OF Water sprayed at machine Change oil. Direct spray away from ma- WATER chine. IN PUMP OIL High humidity in air Check and change oil twice as often. (2400 PSI MODELS ONLY) Piston packing worn. Oil seal worn Check and replace if necessary. ENGINE STRAINS Engine governor misadjusted Readjust governor on engine.

  • Page 13: Preventative Maintenance

    PREVENTATIVE MAINTENANCE This pressure washer was produced with the best available materials and quality craftsmanship. However, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer for maintenance.

  • Page 14: Hose And Spray Gun Assembly

    HOSE & SPRAY GUN ASSEMBLY Pressure Nozzle Brass Soap Nozzle HOSE & SPRAY GUN ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION ITEM PART NO. DESCRIPTION 9.802-166.0 Coupler, 3/8" Female (2400 PSI) 1 8.712-398.0 Nozzle, Brass Soap ▲ Quick Coupler O-Ring 9.802-100.0 9.802-251.0 Hose, 1/4"...
  • Page 15 Form # 8.919-016.0 • Revised 01/14 • Printed in U.S.A. or México...

This manual is also suitable for:

Cd-232336

Table of Contents