How To Change The Acquisition Zone Reference; How To Set Acquisition Zone Shape And Stabilization - Furuno FAR-1513 Operator's Manual

3.15.5

How to change the acquisition zone reference

The acquisition zone can be referenced to heading or North using the following pro-
cedure:
1. Open the [MAIN MENU].
2. Select [TT•AIS], then push the ADJUST knob.
3. Select [ACQUISITION ZONE], then push the ADJUST knob.
4. Select [AZ STAB], then push the ADJUST knob.
5. Select [STAB HDG] to reference heading, or [STAB NORTH] to reference North.
6. Close the menu.
3.15.6

How to set acquisition zone shape and stabilization

The shape of the No. 2 acquisition zone can be a sector or a polygon having up to 10
points. (The shape of the No.1 acquisition zone is always a sector.)
1. Open the [MAIN MENU].
2. Select [TT•AIS], then push the ADJUST knob.
3. Select [ACQUISITION ZONE], then push the ADJUST knob.
4. Select [AZ POLYGON], then push the ADJUST knob.
5. Select the appropriate setting, then push the ADJUST knob.
Setting
[OFF]
[STAB GND]
[STAB HDG]
[STAB NORTH]
6. Close the menu.
Acquisition zone is a sector; number of points is limited to four.
Stabilized against land.
Polygon having 3-10 points. Stabilized against ground.
Polygon having 3-10 points. Stabilized against heading.
Polygon having 3-10 points. Stabilized against North.
3. TARGET TRACKING (TT)
Description
3-17