Download Print this page

Control Panel; Cleaning The Grease Filter - Windster UK-611 Installation & Operating Manual

Advertisement

CONTROL PANEL
This panel is located on the front of the hood.
I.Push button oflight (Fig. 2, Ref A)
2.Push button of motors (High speed, low speed) (Fig 2, RefB, C)
3.Push button of motor-off
(Fig. 2, Ref D)
ABC
D
I.
.
. . I
o
0
0
0
o
'"
~
0
Fig.2
MAINTENANCE
CLEANING
Before any type of operation, make sure that the electrical cord is isolated and the switch is off.
Clean the cooker hoods with mild, liquid detergent and using abrasive cleaning is prohibited.
Light Bulb Replacement:
Switch off the power and remove the light cover from the underside of the range hood.
Replace the light Bulb with a halogen light bulb (lOW)
CLEANING THE GREASE FILTER
The grease filters should be rinsed with hot water at least once a month.
After rinsing and drying, place the grease filter in a dry space.
IMPORTANT
Because grease can lead to overheat and catch fire, please never leave frying food unattended.
To reduce the risk of bodily injuries, please wear "Safety Gloves" for installation,
cleaning, light bull
changing and dismantling.
IROUI!LE~HOOIING
GUIDE
2
PROBLEM
SOLUTION
No electric power
1. Check the plug and socket
2 .Check the wires.
The bulb does not light.
I.Check whether the bulb is broken.
2.Check whether the switch is damaged
1. Check whether the switch of the motor
The motor does not rotate.
is damaged.
2. Replace the motor if the switch is
not damaged.
The Range Hood vibrates
Check whether the blower is damaged.
during Operation
Replace the damaged blower.

Advertisement

loading