Advertisement
COOKER HOOD
Dear Client
For fulfilling the best efficiency of the range hood, please read the manual carefully before installatimlOd
operation Please note this appliance must be installed and serviced by a licensed electrician.
GENERAL INDICATION
Before installing and using the hood, please be sure that the voltage(V) and the frequency(Hz) marked
on the feature plate is in accordance with the voltage and frequency in your area. The feature plate
and technical date are shown on the side of the product.
TECHNICAL
CHARACTERISTICS
Model NO:UK-611
Single speed motor:77W
Halogen
Light Bulb:2x I OW
Voltage: IlO/120V
Frequency:60HZ
Filter:S/S Pyramidal
Filter
Control:Push
Button
INSTALLATION
PLEASE WEAR "SAFETY GLOVES" BEFORE INSTALLATION, CLEANING,
LIGHT BULB CHANGING AND DISMANTLING.
The
hood should be installed
as suction machine
and connected
the plastic columnar
outlet piece
supplied
with the hood( 150mm diameter) to an exhaust pipe connected
directly
to the outside.
We recommend
you should use the 150mm diameter
pipe for better performance
and lower noise levels
NOTE:Please
never connect the hood to chimneys, ventilation
pipes or hot air pipes.
Before connecting
any pipes, you need to consult municipal
ordinances
and request the permission
fron
the people in charge of the building. A good and adequate
ventilation
is important.
WALL MOUNTING
The accessory
is needed to install at the side of the hood. The hood must be installed
at a minimum
distance
of 65CM from the strove top.
Place the installation
ho<;>kin the location
where the hood is mounted.
Drill holes into the wall by using 8mm drill bit.
The accessory
bag includes
the installtion
hook and screws.
NOTE:
If any problems or damages with the Range Hood, please must let a professional
and qualified
person to repair the problems. If there were not normal installation
or normal use, the manufacturer
I importer
I wholesaler will not hold any responsibilities
for any damages, personal property, real estate and bodily
injures.
No matter if it is caused directly or indirectly by the Range Hood.
ASSEMBLY OF DECORATIVE EXTENDIBLE DUCT
Duct A and duct B are connected to hood body. Loose Screws C&D, extend duct B to Ft for your height of
telescopic
Duct (Fig. I)
B
Advertisement
