Table of Contents
Advertisement
SECTION 2
DRIVING YOUR MOTOR HOME
Awning Switch
Patio Awning Auto-Retract Feature
NOTE: The awning retract feature requires the
Ignition Switch to be 'ON'.
The auto-retract sensor is on the roof of the
coach. When the wind speed becomes strong
enough to be a threat to the awning, the system
will retract the awning.
The awning control box is located on the for-
ward wall of the compartment to the rear of the
entry door. Press the switch to manual/position to
disable the auto-retract feature, if desired.
LUGGAGE COMPART-
MENT DOORS
To ensure that compartment doors have
latched properly, press the bottom edge of the
door with the palms of your hands.
This is more important for smaller and lighter
compartment doors because when the door is
"dropped" closed, the air trapped inside the
compartment may create a cushioning effect that
could prevent door latches from engaging
properly.
The power switch for the compartment lights
is located to the left of the main entry door as you
enter the coach.
2-6
Compartment Lights Switch
SEATS
The driver and co-pilot seats may be indepen-
dently adjusted to suit individual preference. To
move the seat forward or backward, press the
slide release button, located on the side of the
seat, and exert slight body pressure in the direc-
tion desired.
The seats may be swiveled to provide easy en-
trance and exit. The swivel feature also allows
the seats on some models to be turned toward the
living area for additional seating while the unit is
parked.
To swivel the seats: Press the release button,
located on the side of the seat, and rotate seat.
The seats are designed to lock only when re-
turned to the forward facing position.
NOTE: If your seats are equipped with power
seat controls, the swivel release button is
located beneath the seat on the right side
of the seat.
To recline the seats: Lift the reclining lever,
lean back to desired incline and release the lever.
To return to the upright position, lift the lever and
lean body forward. Allow the seat to return to the
desired position and release the lever.
Advertisement
Table of Contents
