Table of Contents
Advertisement
If your cable needs to be custom made, you can find the pin assignments
for the board's connector in Appendix C.
2.17 LCD-B connector (CN11)
The PCM-3341 supports 36-bit LCD that must be connected to both CN7
(40-pin) and CN11 (20-pin).
The pin assignments for both CN7 and CN11 can be found in Appendix
C.
2.18 CompactFlash™ socket (CN22)
The PCM-3341 is equipped with a CompactFlash™ disk socket on the
solder side, which supports the IDE interface CompactFlash disk card.
The socket itself is specially designed to prevent any incorrect installation
of the CompactFlash disk card. When installing or removing the Com-
pactFlash disk card, please make sure that the system power is off.
The CompactFlashô disk card is defaulted as the E disk drive in your PC
system. To fit the CFC into the PCM-3341, simply plug it into
the designated connector. It will only fit when the red triangle on the CFC
is aligned with the triangle on the connector. The card will not fit any
other way (do NOT use excessive force).
2.19 I2C BUS (CN4)
PCM-3341 provides a 2-pin I2C connector.
2.20 HDD LED connector (CN15)
PCM-3341 provides a 2-pin LED connector.
PCM-3341 User's Manual
16
Advertisement
Table of Contents
