HP ProLiant BL480c Maintenance And Service Manual page 41

Remove all hard drives
3.
Remove all hard drive blanks
4.
Remove the access panel
5.
Remove the hard drive backplane
6.
Remove the front panel/hard drive cage assembly
7.
page 30).
Remove all FBDIMMs ("FBDIMM" on page 26).
8.
Remove any mezzanine cards
9.
Remove the heatsink ("Heatsink" on page 32).
10.
Open the processor retaining latch and the processor socket retaining bracket.
11.
CAUTION: To avoid damage to the processor:
Handle the processor only by the edges.
•
• Do not touch the bottom of the processor, especially the contact area.
("Hard drive" on page 26).
("Hard drive blank" on page 25).
("Access panel" on page 25).
("Hard drive
("Mezzanine card" on page 27).
backplane" on page 29).
("Front panel/hard drive cage
Removal and replacement procedures 41
assembly" on