To replace the component, reverse the removal procedure.
Hard drive
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
1.
SATA hard drive LED
Back up all server data.
2.
Remove the hard drive.
3.
To replace the component, reverse the removal procedure.
FBDIMM
CAUTION:
integrity.
To remove the component:
Power down the server blade (on page 24).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
combinations" on page 55).
Use only HP FBDIMMs. FBDIMMs from other sources may adversely affect data
("Access
panel" on page 25).
Removal and replacement procedures 26
("SAS and