To replace the component, reverse the removal procedure.
Server blade handle
To remove the component:
Power down the server blade (on page 24).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
Remove the front panel/hard drive cage assembly
7.
page 30).
Remove the server blade handle.
8.
To replace the component, reverse the removal procedure.
Release button
To remove the component:
Power down the server blade (on page 24).
1.
Remove the server blade (on page 24).
2.
Remove the access panel
3.
Remove all hard drives
4.
Remove all hard drive blanks
5.
Remove the hard drive backplane
6.
Remove the front panel/hard drive cage assembly
7.
page 30).
("Access
panel" on page 25).
("Hard
drive" on page 26).
("Hard drive
blank" on page 25).
("Hard drive
("Access
panel" on page 25).
("Hard
drive" on page 26).
("Hard drive
blank" on page 25).
("Hard drive
backplane" on page 29).
("Front panel/hard drive cage
backplane" on page 29).
("Front panel/hard drive cage
Removal and replacement procedures 31
assembly" on
assembly" on