Removing and installing shaft sealing ring for
driver
If the intermediate flange has been removed, le-
•
ver out the sealing ring.
00 5 010
If the intermediate flange is installed, pull out the
•
sealing ring with an internal puller,
BMW No. 00 5 010, and pressure head.
Pre-shape the sealing ring, which must be dry,
•
with the thumb and drive it in with drift,
BMW No. 11 1 620, and handle,
BMW No. 00 5 500.
Removing countershaft and layshaft
with freewheel
Pull countershaft and layshaft out of the engine
•
block together.
Note flat spring (1).
•
11.16
Downloaded from
www.Manualslib.com
1
LT110150
manuals search engine
LT110140