Checking Brake Pads - Front Wheel - BMW K 1100 LT 1995 Rider's Manual

Checking brake pads
Front wheel @ Check/measure thickness of brake pads
Tools required (2).
Allen keys Minimum pad thickness:
= shinny 1.5 mm (0.06 in).
_ 8 baa, e@ Refit brake calipers in the reverse order.
Screwdriver with reversible blade. Tighisning fordue
Procedure Brake caliper screws (1)
e Place motorcycle on center stand. = Belin (e3 tel.)
e K 1100 LT: Take off front wheel rear
fender section (see page 49).
@ Remove fastening screws (1) for left/right
brake calipers.
@ Carefully remove brake calipers.
55
Note
Have work performed on brake system
by your BMW motorcycle dealer or a
qualified service technician.
Caution
Do not damage brake discs and pads
when removing and installing brake cali-
pers!
Do not operate handbrake lever with
brake calipers removed!
Ensure brake pads have at least mini-
mum thickness!
Have tightening torques checked by your
BMW motorcycle dealer or a qualified
service technician!